Do you have more questions?

Radiators

• What colours are the BIAL radiators available in?

  The radiators are available in four basic colours (white, anthracite, beige and platinum). You can choose the colours and configurations on our internet site. Custom-made products are also available in other RAL colours and in chrome.

• Can I order a radiator with dimensions different from the standard?

  We also make custom-made radiators with non-standard dimensions. It is desirable to work on the basis of radiators with dimensions from our standard programme. However, in line with your wishes and demands we can also make radiators of non-standard forms, dimensions and colours.

• Do you also make aluminium, copper and stainless steel radiators?

  No.

• Does the electrical BIAL radiator need to be filled with a special liquid?

  Water is sufficient. If there is danger of freezing, we recommend a mixture of water and antifreeze or water and glycol. We do not recommend oil.

• What is the warranty period for your radiators and other products?

  The warranty period for our radiators is five (5) years and the warranty period for electrical heaters is two (2) years.

Show all questions

Valves

• What kind of a valve is compatible with the radiator?

  We recommend that you choose the type of radiator and the type of connection to the warm water system (side connection or centre connection) before installing the machines and that you consult with the designer of your machine installation. For a pleasant appearance and comfortable use we recommend the use of designer valves.

Heaters and accessories

• How does the ON/OFF heater work? Does the heater have a thermostat? How many degrees does the ON/OFF heater reach?

  The ON/OFF heater works at maximum power (eg. 600W) the entire time of the operation and does not have a built-in thermostat. The electrical heater emits maximum power (eg. 600W) and the temperature of the radiator depends on its size. Read more in the instructions.

• How does the ELS and ILS heater work?

  Electric heaters include buttons:
  - temperature regulation
  - dryer function
  - turn on/off button

  ELECTRIC HEATER ELS:
  Turning the device on with the "on/off" button will result in the radiator heating up to the set temperature. After reaching the set temperature the device will turn off and on regularly in order to maintain the set temperature.

  In order to increase the temperature of the radiator, press "+" once or several times as required; the correct number of diodes will start blinking. The last blinking diode indicates the set temperature, whilst the last diode which shines constantly, indicates the current temperature. The remaining diodes will start shining constantly on reaching subsequent temperature levels.
  In order to decrease the temperature of the radiator, press "-" once or several times as required; the correct number of diodes will start blinking. The last diode, which shines continuously, indicates the set temperature whilst the last blinking diode indicates the current temperature. The remaining diodes will start fading on reaching subsequent temperature levels.
  
  ELECTRIC HEATER ILS:

  Pressing the button "on/off"switches on the device, after which, the element will begin to heat. By turning itself on and off regularly, the device regulates the heating output of the radiator to an average output, as set by the user within 30-100% of nominal heating output of the device.

  The design of the device (PTC heating element) protects the user from harm via burning, by automatically limiting radiator temperature to 60°C, regardless of the current setting (provided that the heat output of the element has been correctly matched with the heat output of the radiator).

  Setting of required heating output. In order to obtain the required room temperature, please set the right heating level of the device (buttons +/-). It is possible to set 1 of 5 heating levels: 30-40-60-80-100% of the nominal heating output. Selection of every subsequent level is indicated by switching on subsequent diodes.

  DRYER FUNCTION (for electric heater ELS and ILS)
  The Dryer turns the device on for 2 hours, e.g. in order to dry a towel. After this period of time the device automatically switches to the mode to which it was set before the dryer mode.

  The dryer is turned on by pressing button "timer" (also when the device is off). The device will start heating at the temperature which was last set. This temperature can be modified as required while the device is running (buttons "+" and "-"). If the device was off before the dryer mode was been activated, then it will turn off automatically when the dryer mode is finished.

  ANTI-FREEZE FUNCTION (for electric heater ELS and ILS)

  When the device is off and the temperature surrounding the temperature sensor drops to below 6° C, the device will switch on automatically. This is to prevent the heating agent inside the radiator from freezing. The activation of Anti-freeze mode is indicated by the blinking of the middle diode.

  The device should be installed by a professional, who has to comply with the instructions by the manufacturer, and the standards and restrictions for the installation of the device in question.

• Are your BIAL heaters also compatible with other tubular radiators?

  Yes. The installation and the connection to the mains power supply must be performed by a professional.

• What is supplied with the radiator?

  With the BIAL radiator there are also included: brackets, vent plug, blind plug, warranty certificate and instructions for installation and maintenance.

• Where do I install the electrical heater with the A100 radiator?

  If you are only going to use the radiator in the electrical mode, we recommend that you install the heater in the right vertical tube. If you are only going to use the radiator in the combined mode (electricity-warm water), the electrical heater should be installed into the left vertical tube. Use the T-piece to connect the electrical heater to the radiator with the combined function.

Show all questions